Chemical Datasheet

For more information, please visit our website.

CALCIUM CARBIDE

Chemical Identifiers | Hazards | Response Recommendations | Physical Properties | Regulatory Information | Alternate Chemical Names

Chemical Identifiers

CAS Number UN/NA Number DOT Hazard Label USCG CHRIS Code

• 75-20-7

• Dangerous When Wet

• CCB

NIOSH Pocket Guide International Chem Safety Card

none

• CALCIUM CARBIDE

NFPA 704

Diamond Hazard Value Description 3 3 0 W Health 3 Can cause serious or permanent injury. Flammability 3 Can be ignited under almost all ambient temperature conditions. Instability 0 Normally stable, even under fire conditions. Special W Reacts violently or explosively with water.

(NFPA, )

General Description

Grayish-black irregular lump solid. Used to make acetylene and in steel manufacture.

Hazards

Reactivity Alerts

• Strong Reducing Agent
• Water-Reactive

Air & Water Reactions

Reacts rapidly with water to generate the flammable gas acetylene and the base calcium hydroxide. Enough heat may be generated to ignite the gas [Jones, G.W. BM Report Invest. ].

Fire Hazard

Behavior in Fire: If wet by water, highly flammable acetylene gas is formed. (USCG, )

Health Hazard

Eye and skin irritation (USCG, )

Reactivity Profile

CALCIUM CARBIDE is a reducing agent. May react vigorously with oxidizing materials. The powdered mixture of the acetylide and iron oxide and iron chloride burns violently upon ignition, producing molten iron. Calcium carbide incandesces with chlorine, bromine, or iodine at 245, 350, or 305°C., respectively, [Mellor, , Vol. 5, 862]. The carbide burns incandescently when mixed and heated with lead difluoride, magnesium, hydrogen chloride, and tin (II) chloride, [Mellor, , , , and ], respectively. Interaction of calcium carbide with methanol to give calcium methoxide is vigorous , but subject to an induction period of variable length. Once reaction starts, evolution of acetylene gas is very rapid, unpublished observations [Bretherick ]. Mixing calcium carbide with silver nitrate solutions forms silver acetylide, a highly sensitive explosive. Copper salt solutions would behave similarly, [Photogr. Sci. Eng., , 10, 334]. The mixture of calcium carbide and sodium peroxide is explosive, as is calcium carbide and perchloryl fluoride as gases at 100-300°C.

Belongs to the Following Reactive Group(s)

Potentially Incompatible Absorbents

No information available.

Response Recommendations

Isolation and Evacuation

IMMEDIATE PRECAUTIONARY MEASURE: Isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters (75 feet) for solids.

LARGE SPILL: Consider initial downwind evacuation for at least 300 meters ( feet).

FIRE: If tank, rail tank car or highway tank is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, )

Excerpt from ERG Guide 138 [Substances - Water-Reactive (Emitting Flammable Gases)]:IMMEDIATE PRECAUTIONARY MEASURE: Isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters (75 feet) for solids.LARGE SPILL: Consider initial downwind evacuation for at least 300 meters ( feet).FIRE: If tank, rail tank car or highway tank is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, )

Firefighting

DO NOT USE WATER OR FOAM.

SMALL FIRE: Dry chemical, soda ash, lime or sand.

LARGE FIRE: DRY sand, dry chemical, soda ash or lime or withdraw from area and let fire burn. If it can be done safely, move undamaged containers away from the area around the fire.

FIRE INVOLVING METALS OR POWDERS (ALUMINUM, LITHIUM, MAGNESIUM, ETC.): Use dry chemical, DRY sand, sodium chloride powder, graphite powder or class D extinguishers; in addition, for Lithium you may use Lith-X® powder or copper powder. Also, see

FIRE INVOLVING TANKS, RAIL TANK CARS OR HIGHWAY TANKS: Fight fire from maximum distance or use unmanned master stream devices or monitor nozzles. Do not get water inside containers. Cool containers with flooding quantities of water until well after fire is out. Withdraw immediately in case of rising sound from venting safety devices or discoloration of tank. ALWAYS stay away from tanks in direct contact with flames. (ERG, )

Excerpt from ERG Guide 138 [Substances - Water-Reactive (Emitting Flammable Gases)]:DO NOT USE WATER OR FOAM.SMALL FIRE: Dry chemical, soda ash, lime or sand.LARGE FIRE: DRY sand, dry chemical, soda ash or lime or withdraw from area and let fire burn. If it can be done safely, move undamaged containers away from the area around the fire.FIRE INVOLVING METALS OR POWDERS (ALUMINUM, LITHIUM, MAGNESIUM, ETC.): Use dry chemical, DRY sand, sodium chloride powder, graphite powder or class D extinguishers; in addition, for Lithium you may use Lith-X® powder or copper powder. Also, see ERG Guide 170 FIRE INVOLVING TANKS, RAIL TANK CARS OR HIGHWAY TANKS: Fight fire from maximum distance or use unmanned master stream devices or monitor nozzles. Do not get water inside containers. Cool containers with flooding quantities of water until well after fire is out. Withdraw immediately in case of rising sound from venting safety devices or discoloration of tank. ALWAYS stay away from tanks in direct contact with flames. (ERG, )

Non-Fire Response

ELIMINATE all ignition sources (no smoking, flares, sparks or flames) from immediate area. Do not touch or walk through spilled material. Stop leak if you can do it without risk. Use water spray to reduce vapors or divert vapor cloud drift. Avoid allowing water runoff to contact spilled material. DO NOT GET WATER on spilled substance or inside containers.

SMALL SPILL: Cover with DRY earth, DRY sand or other non-combustible material followed with plastic sheet to minimize spreading or contact with rain. Dike for later disposal; do not apply water unless directed to do so.

POWDER SPILL: Cover powder spill with plastic sheet or tarp to minimize spreading and keep powder dry. DO NOT CLEAN-UP OR DISPOSE OF, EXCEPT UNDER SUPERVISION OF A SPECIALIST. (ERG, )

Excerpt from ERG Guide 138 [Substances - Water-Reactive (Emitting Flammable Gases)]:ELIMINATE all ignition sources (no smoking, flares, sparks or flames) from immediate area. Do not touch or walk through spilled material. Stop leak if you can do it without risk. Use water spray to reduce vapors or divert vapor cloud drift. Avoid allowing water runoff to contact spilled material. DO NOT GET WATER on spilled substance or inside containers.SMALL SPILL: Cover with DRY earth, DRY sand or other non-combustible material followed with plastic sheet to minimize spreading or contact with rain. Dike for later disposal; do not apply water unless directed to do so.POWDER SPILL: Cover powder spill with plastic sheet or tarp to minimize spreading and keep powder dry. DO NOT CLEAN-UP OR DISPOSE OF, EXCEPT UNDER SUPERVISION OF A SPECIALIST. (ERG, )

Protective Clothing

Chemical safety goggles and (for those exposed to unusually dusty operations) a respirator such as those approved by the U.S. Bureau of Mines for "nuisance dusts". (USCG, )

DuPont Tychem® Suit Fabrics

Stock tanks - which type? - Around The Farm - Chronicle Forums

No information available.

First Aid

INHALATION OF DUST: remove from further exposure and call a doctor.

SKIN: wash with plenty of water.

EYES: flush with clean running water at an eye wash fountain for at least 15 min. and get medical attention. (USCG, )

Physical Properties

What is this information?

Note: For Vapor Density and Specific Gravity, comparing the value to 1.0 can tell you if the chemical will likely sink/rise in air or sink/float in fresh water (respectively). Short phrases have been added to those values below as an aid. However, make sure to also consider the circumstances of a release. The Vapor Density comparisons are only valid when the gas escaping is at the same temperature as the surrounding air itself. If the chemical is escaping from a container where it was pressurized or refrigerated, it may first escape and behave as a heavy gas and sink in the air (even if it has a Vapor Density value less than 1). Also, the Specific Gravity comparisons are for fresh water (density 1.0 g/mL). If your spill is in salt water (density about 1.027 g/mL), you need to adjust the point of comparison. There are some chemicals that will sink in fresh water and float in salt water.

The Physical Property fields include properties such as vapor pressure and boiling point, as well as explosive limits and toxic exposure thresholds The information in CAMEO Chemicals comes from a variety of data sources For Vapor Density and Specific Gravity, comparing the value to 1.0 can tell you if the chemical will likely sink/rise in air or sink/float in fresh water (respectively). Short phrases have been added to those values below as an aid. However, make sure to also consider the circumstances of a release. The Vapor Density comparisons are only valid when the gas escaping is at the same temperature as the surrounding air itself. If the chemical is escaping from a container where it was pressurized or refrigerated, it may first escape and behave as a heavy gas and sink in the air (even if it has a Vapor Density value less than 1). Also, the Specific Gravity comparisons are for fresh water (density 1.0 g/mL). If your spill is in salt water (density about 1.027 g/mL), you need to adjust the point of comparison. There are some chemicals that will sink in fresh water and float in salt water.

Chemical Formula:

• C2Ca

Flash Point: data unavailable

Lower Explosive Limit (LEL): data unavailable

See also:
Exploring the Advantages and Disadvantages of LiFePO4 ...

Wanding contains other products and information you need, so please check it out.

Upper Explosive Limit (UEL): data unavailable

Autoignition Temperature:

Not flammable (USCG, )

Melting Point: data unavailable

Vapor Pressure: data unavailable

Vapor Density (Relative to Air): data unavailable

Specific Gravity:

2.22 at 64.4°F (USCG, ) - Denser than water; will sink

Boiling Point: data unavailable

Molecular Weight:

64.1 (USCG, )

Water Solubility: data unavailable

Ionization Energy/Potential: data unavailable

IDLH: data unavailable

AEGLs (Acute Exposure Guideline Levels)

No AEGL information available.

ERPGs (Emergency Response Planning Guidelines)

No ERPG information available.

PACs (Protective Action Criteria)

Chemical PAC-1 PAC-2 PAC-3 Calcium carbide (75-20-7) 120 mg/m3 mg/m3 mg/m3

(DOE, )

Regulatory Information

What is this information?

The Regulatory Information fields include information from the U.S. Environmental Protection Agency's Title III Consolidated List of Lists, the U.S. Cybersecurity and Infrastructure Security Agency's Chemical Facility Anti-Terrorism Standards, and the U.S. Occupational Safety and Health Administration's Process Safety Management of Highly Hazardous Chemicals Standard List (see more about these data sources ).

EPA Consolidated List of Lists

Regulatory Name CAS Number/
313 Category Code EPCRA 302
EHS TPQ EPCRA 304
EHS RQ CERCLA RQ EPCRA 313
TRI RCRA
Code CAA 112(r)
RMP TQ Calcium carbide 75-20-7 10 pounds

(EPA List of Lists, )

CISA Chemical Facility Anti-Terrorism Standards (CFATS)

No regulatory information available.

OSHA Process Safety Management (PSM) Standard List

No regulatory information available.

Alternate Chemical Names

What is this information?

This section provides a listing of alternate names for this chemical, including trade names and synonyms.

For more calcium carbide structural formulainformation, please contact us. We will provide professional answers.

• ACETYLENOGEN
• CALCIUM ACETYLIDE
• CALCIUM ACETYLIDE (CA(C2))
• CALCIUM CARBIDE
• CALCIUM DICARBIDE
• CARBIDE
• ETHYNE, CALCIUM DERIV.