Choosing the Best Method for Installing Skirting Boards

RAITTO contains other products and information you need, so please check it out.

When it comes to installing skirting boards, there are several different methods you can use. Nails, screws, and adhesive are all popular choices, but it can be difficult to know which one is the best for the job. You may have seen our previous blog on nails, screws and adhesive for skirting boards, where we took a quick look at all 3 and offered some quick tips on each method... In this blog post, we'll dive a little deeper and discuss the pros and cons of each method so you can make an informed decision when choosing how to install your skirting boards.

Skirting, Skirting, Skirting...

Installing skirting boards is an important aspect of any home renovation or DIY project. Skirting boards are not only decorative, but they also protect your walls from scuffs, scratches, and dirt. If you're planning to install skirting boards in your home, you'll need to decide which method to use - nails, screws or adhesive.

While each method has its advantages and disadvantages, the best choice ultimately depends on your skill level and the type of skirting board you are installing. If you're a DIY enthusiast, you can easily install skirting boards using any of these methods. However, if you're unsure, it's always best to consult a professional.

Before you install your skirting boards, make sure you have the right tools for the job. You'll need a saw, measuring tape, level, hammer, drill, and screws or nails, depending on the method you choose.

In the next sections, we'll outline the pros and cons of each method, and provide some tips to help you get the job done right.

So, whether you're a seasoned DIYer or a beginner, let's get started with choosing the best method for installing skirting boards!

Installing Skirting Boards With Nails

One popular method for installing skirting boards is with nails. Here are some pros and cons to consider:

Pros

- Easy to find and purchase nails at hardware stores

- Relatively inexpensive compared to other installation methods

- Nails provide a strong hold and ensure the skirting boards stay in place

- A common choice for DIY renovators or those with basic carpentry skills

Cons

- Nails can be visible on the surface of the skirting boards, affecting the appearance of the room

- Nails can loosen over time and require periodic maintenance

- Installation with nails requires more precision and care to avoid splitting or damaging the boards

- Can create more dust and debris during the installation process

Overall, installing skirting boards with nails can be a great option for those who are looking to complete a DIY renovation on a budget. However, it's important to weigh these pros and cons carefully and choose a method that will best suit your needs and skill level.

Installing Skirting Boards With Screws

Another option for installing skirting boards is with screws. Here are the pros and cons to this method:

Pros

- Screwed skirting boards are more secure than nailed skirting boards and less likely to become loose over time.

- This method allows for more precision in placement and adjustments can easily be made.

- Screws can be a good option for uneven walls, as they can be used to pull the skirting board flush against the wall.

Cons

- It can be more time-consuming to install skirting boards with screws than with nails or adhesive.

- The screw holes may need to be filled and painted over for a clean finish.

- This method may not be suitable for all skirting board materials, as screws can split the wood or create a visible mark on the surface.

Are you interested in learning more about best adhesive for upvc skirting? Contact us today to secure an expert consultation!

Tips for installing skirting boards with screws

- Pre-drill holes to avoid splitting the skirting board and make the screw placement more accurate.

- Use screws that are long enough to hold the skirting board securely but not so long that they poke through the other side.

- Consider using countersunk screws to create a cleaner finish and make it easier to fill in the screw holes later.

- Work slowly and carefully to ensure the skirting board is level and flush against the wall.

Installing Skirting Boards With Adhesive

Adhesive is a popular method for installing skirting boards because it provides a seamless finish without visible fixings. Here are some pros and cons to consider:

Pros

- Adhesive is quick and easy to use, allowing you to install skirting boards efficiently.

- You don't need to use nails or screws, which can leave visible holes or require filling and painting.

- The adhesive provides a strong and durable bond that holds the skirting board securely in place.

Cons

- Adhesive may not be suitable for all types of walls or surfaces. It's important to check the manufacturer's recommendations before using it.

- Removing skirting boards that have been installed with adhesive can be difficult, as the adhesive may damage the wall or the skirting board itself.

- Adhesive may not be as reliable in extreme temperatures or damp conditions.

When using adhesive to install skirting boards, it's important to ensure that the surface is clean and dry before applying the adhesive. Use a generous amount of adhesive along the back of the skirting board, and press it firmly into place, using a spirit level to ensure that it is straight. Allow the adhesive to dry completely before filling any gaps and painting or staining the skirting board to match your decor. When using adhesive to install skirting boards, it's important to ensure that the surface is clean and dry before applying the adhesive. Use a generous amount of adhesive along the back of the skirting board, and press it firmly into place, using a spirit level to ensure that it is straight. Allow the adhesive to dry completely before filling any gaps and painting or staining the skirting to match your decor.

Tips for Installing Skirting Boards

1. Measure twice, cut once: Ensure that you measure your skirting board correctly before cutting it. You don't want to end up with too much or too little material.
2. Choose the right tool: Make sure you have the right saw for cutting your skirting board, whether it is a miter saw, hand saw or jigsaw.
3. Make sure the wall is clean: Clean the wall thoroughly before installing your skirting board. This will ensure that the adhesive or nails will stick properly.
4. Take your time: Don't rush through the installation process. Installing skirting boards requires precision and accuracy, so take your time and make sure it is done right.
5. Paint or stain beforehand: It is easier to paint or stain your skirting board before installing it. This will save you time and make the installation process cleaner.
6. Use a spirit level: Make sure your skirting board is level. You don't want a wonky installation that will ruin the look of your DIY project.
7. Fill any gaps: Use a wood filler to fill any gaps between your skirting board and the wall. This will give it a polished finish.
8. Sand down any rough edges: If your skirting board has rough edges, use sandpaper to smooth them out. This will give your installation a professional look.
9. Check for movement: After you've installed your skirting board, check to ensure that it isn't loose. You don't want it moving and ruining your DIY project.
10. Finish with sealant: Use a sealant to finish off your skirting board installation. This will protect it from wear and tear, and ensure that it lasts for years to come.

First time installing skirting? Don't worry, we have an in-depth guide on installing skirting boards.

Skirting boards? These are the possibilities

Sunday 10 July

Skirting boards make sure your floor is beautifully finished. They are therefore indispensable for a radiant interior. Are you planning to buy skirting boards? Then of course there are many types to choose from. But don't worry, in this blog you'll discover how to find the right skirting boards!

Why are skirting boards so important?

Skirting boards are a necessity. Not only because they protect your wall from damage, but also because they provide a nice transition between floor and wall. However, it is important to choose the right skirting boards. Because although you might think they don't stand out, they largely determine the look of your entire interior.

Different types of skirting boards

Skirting boards exist in various colours, types and sizes. Therefore, you are guaranteed to find the best skirting boards to complete your floor. But because of the many options, it is not always easy to choose. For this reason, we have made a handy overview of the different types of skirting boards for you. They are classified according to height, material, installation method, colour and finish and style. Discover below which skirting boards go best with your floor!

Materials

First of all, skirting boards exist in various materials. There are skirting boards in MDF wood, pine wood, hardwood, PVC and plastic. Each material has its own advantages and disadvantages. Wooden skirting boards, for example, give a warm appearance. Plastic, on the other hand, is cheap and easy to maintain. PVC is also a good alternative because it is scratch-resistant and colourfast.

But wood requires some maintenance and is pricey. Plastic is of lesser quality and PVC is not cheap either. To make the best choice, you need to weigh up the pros and cons.

Height

Skirting boards also vary in height. Most people choose a height of 9 to 12 centimetres. But the height of the ceiling and the size of the room are especially important when determining the ideal skirting-board height. The higher your ceiling is, the higher you can place your skirting boards. In a small room it is better to use a low skirting board.

Colour and finish

Do you want to buy skirting boards? Then you will see that they are available in many different colours and finishes. In the past skirting boards were often chosen in the same colour as the floor, but nowadays it is trendy to choose a different colour. For example, you can choose a skirting board in the colour of the wall for a playful look. Can't find it right away? Then buy a painter's plinth and paint it in the right colour.

You can also create a special effect by choosing a lacquered skirting board and keeping your wall matt. Another idea is to buy your skirting board in the same colour as your window frames. As you can see, there are many ways to create a special interior by using skirting boards!

Style

Skirting boards also exist in various styles. There is the classic skirting board, modern skirting board, design skirting board and more. Choose skirting boards that match the rest of your interior in terms of style to create an irresistible whole.

Can't see the differences in style? Then it is useful to know that in a modern interior smooth skirting boards are often used. In a classic or rural interior you can use a beadboard with relief. But there are many more possibilities!

Placement method

Skirting boards can also be placed in different ways. How you should place them depends on the model. There are the ordinary skirting boards that you have to glue or screw. Not a handyman? Then adhesive skirting boards are a better option.

Choose convenience: have your skirting boards installed by a professional from Zoofy

Installing skirting boards is not easy if you don't know how. Fortunately, you can choose to have this done by a professional from Zoofy. This way, you are not only assured of a good result, but you also save a lot of time and effort. At Zoofy you can easily find the best professional in your neighbourhood. The advantage of this is that you never have to pay call-out charges.

Want more information on foam skirting panels? Feel free to contact us.