Fiberglass mesh

Fiberglass mesh is a neatly woven, crisscross pattern of fiberglass thread that is used to create new products such as tape and filters. When it is used as a filter, it is not uncommon for the manufacturer to spray a PVC coating to make it stronger and last longer. The most common place to find fiberglass mesh is in tape products.

Read more

Drywall finishers use the mesh frequently. In fact, it is common to replace the paper tape used to float the joint between two pieces of drywall. The mesh that drywall finishers use comes on a roll just like paper drywall tape. The added benefit for the drywall finisher is to roll out the mesh over a great distance before having to apply the first coat of joint compound. Not only does it help them in this manner, but it also causes a stronger bond between the joint compound, the tape and the wall.

Drywall finishers also use this tape to patch holes. The most common hole in the drywall generally occurs where a doorknob has hit a wall too many times. If it is only slightly damaged, a couple of short pieces of the tape will be formed into a square and placed over the hole. A joint compound will then be applied directly to it. If the hole is too large to patch with fiberglass mesh alone, a piece of metal flashing can be added behind the tape before applying joint compound. Construction work is not the only use for fiberglass mesh.

As a filtering system, alkali resistant fiberglass mesh works really well. As the water flows through it, the mesh catches even the smallest impurities. In addition to this use, it can also be used as a mosquito net.

Firefighters and others who work with dangerous chemicals may use fiberglass mesh in protective clothing. Firemen wear jackets made of tightly woven mesh when they are battling a fire. During firefighting, it keeps their clothing from catching fire. Among other things, fiberglass mesh can be used for mold making as well as for protection againstcorrosive chemicals.

Glued and Coating Machine

a)The coating line can produce the fiberglass mesh with max width at mm,which adopts vertical type and can avoid the mesh hang down because of self-weight .At same time,the coating device adopts the structure of the air pressure to let the glue be coated more uniform and make the mesh joint better, and save the glue.

 

b)Our drying baker adopts type is different from the resistance wire. It can heat the mesh in circle and avoid the mesh burned . It is more important that the consumption power is less .

 

 

c)The heating temperature can be controlled in the control panel,which can ensure every part of fiberglass mesh will be the same heat. Of course the finished mesh quality will be very good. Not like the electricity, this part is in high temperature while that parts is in low temperature.

Goto xzh to know more.

 

d)We have a store cloth unit, which can make sure the machine is not stopped when the fiberglass mesh is load-off. The cloth store unit can store about 30m mesh.

 

e)Our production capacity can reach -m each hour.

 

Width : 

mm/mm/mm or customized

Speed : 

-m/hour(1.0m width)

Total power 

10.0KW(1.0m width)

EngergyConsumpition

about 10.0cbm (1.0m width)

Weight 

9.8 tons (1.0m width)

 

Are you interested in learning more about Fiberglass Mesh manufacturer? Contact us today to secure an expert consultation!