Alongside best underground utility locator equipment before beginning an outdoor excavation or construction project, is essential that you contract a professional surveyor to identify and mark underground utilities and boundaries. For the effectiveness and safety of your crew, it is crucial that you invest in a reliable.

The company is the world’s best Buried Cable Detection Systems supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.

Being such an important investment, you do not want to make wild guesses when buying this equipment. To save you some time and money, we have prepared this utility locator shopping guide. To learn everything you need in order to purchase the best underground utility locator, read on.

How to Locate Underground Utilities

When executing a construction or excavation site, you will need to be extra careful to avoid damaging utility lines buried underneath the property. From gas to cable to sewer, to water, damaging a utility line can be an expensive mistake, not to mention time-consuming.

Before commencing your construction project, take time to contact a seasoned surveyor to mark out every utility line crossing through the property. However, there is some bad news &#; even after a professional has marked out the utility lines, there is no sure way to ascertain the accuracy.

If there happens to be any form of interference, the reading will be impacted, and the state surveyors often overlook private utility lines. To enhance accuracy and promote safety, it is advisable that you invest in good underground utility locator equipment. This technology will help you double-check your readings and markings. This, in turn, minimizes the chances of making potentially costly and hazardous errors.

How a Utility Line Locator Works

This equipment can use either of the two possible techniques &#; passive or active locating. An active utility line locator works by searching for the specific utility line through a direct connection or inductive method. The equipment is attached to the utility line directly, and when that is not possible, it induces frequencies into the ground, and those frequencies are reradiated by the utility lines.

On the other hand, passive locators are used to finding unknown utility lines. The surveyor uses a frequency received to sweep through your site, checking for underground pipes radiating frequencies.

The only downside to the passive line locator is that the equipment does not distinguish between the various types of pipes. With such equipment, you will not be able to tell the type of pipe buried beneath your construction site &#; whether it&#;s cable, water, gas, or sewer.

With that said, you can now tell why it is important to choose the most appropriate utility line detection technology for your project. There are typically two types of underground pipe locator technologies &#; multiple frequency and single frequency. Both technologies apply ground-penetrating radar to detect objects underground.

The single frequency locator is the traditional option and consists of a single transmitter that produces one high-frequency signal. Multiple frequency locators produce more frequencies, and this enables you to make clear distinctions between different utility lines in your site.

When is a Utility Locator Needed?

Underground pipe detection equipment is necessary when preparing to execute a construction site. The state&#;s contractor will do you quite well but having your own underground pipe locator allows you to double-check the markings. The equipment will save you the expense and trouble of having to call the state contractor again in case anything went south.

With your own equipment, you can easily detect private utility lines. The state contractor is likely to only mark well-known lines, overlooking private ones. Locating all power, gas, water, or cable lines crossing through your property is important before starting your construction or excavation project.

Detectable Objects
Utility line detecting equipment is generally grouped by use-case. There are magnetic locators, for instance, which are used to detect ferromagnetic underground pipes. The magnetic locator will also detect gas valves, septic tanks, and steel property pins.

A magnetic detector is, however, not ideal for locating underground utility lines such as water, power, and gas lines. A Pipe and cable detector is the most appropriate equipment for locating these lines. It will not only detect the lines but will also distinguish between the various types of lines.

Pipe and cable locators have two major parts &#; the receiver and the transmitter. The latter induces a signal into the ground, targeting any utility line beneath, and the former is used to trace the signal.

You can use an underground line locator to find buried utility lines of metallic construction. The equipment can also locate non-metallic utility lines as long as there is a tracer wire alongside them.

How to Pick Best Underground Utility Locator Equipment

When it comes to locating utility lines, a piece of reliable equipment will make all the difference. You will need to pay attention to the intended use when shopping for a pipe detector for one that is ideal for one application may not be ideal for all other applications.

Below are some of the factors you should consider when buying cable and pipe locators:
1. Durability
Whatever equipment you buy should be capable of withstanding the nature of your site and handling rough operations.
2. Technology
Utility pipe locators use different ground penetration technologies, and it is, therefore, necessary that you decide whether you need a multi-frequency or single frequency or a magnetic pipe locator.
3. Warranty
If you intend to buy this equipment, make sure you purchase one that is protected by a genuine warranty. You should go through the warrant to familiarize yourself with what is covered.
4. Ease of Operation
The equipment should be easy to operate without too many instructions. The display should be easy-to-read.
5. Accessories
Great equipment will come with relevant accessories such as rechargeable batteries, connector cables, and clamps.
6. Price
High-quality locators are available at an affordable price. However, there is a reason why I have listed price as the last factor; you should not shop based on price alone.

Take Action Today
The secret to doing a great job is having the right tools for the job. With a high-quality cable locator, you have the power of ground penetration radar in your hands. Contact us for affordable prices and quality equipment. Quinn Equipment is an excellent provider of rotary laser levels.

Our Underground Utility Locator Equipment!

Underground Cable Locators &#; A Very Innovative And Cost-Effective Device

--

For more information, please visit Fence Sensors.

Many industries and other utility facilities have cables that are installed under the ground. In earlier times, cables were almost always overhead. But with advanced technology and times most cables today are laid under the ground.

Laying cables under the ground is one thing but repairing them and overhauling them from time to time is another issue. Sometimes the ground needs to be dug for various other reasons also. But then what will you do or how to do it with underground cables?

Importance Of Underground Cable Tracing UAE

If you were living in earlier times you would simply have to rely on plans and maps to find out the possible areas where the cables are laid. But gone are those days of uncertainty. Today you have much more advanced systems for detecting cables under the ground. You can rely on Underground Cable Tracing methods to facilitate work.

The underground cable tracing system is a very modern way of detecting underground cables and pipes. It is a better option because it saves a lot in terms of manpower and resources. Instead of digging blindly relying on a piece of paper to help you locate cables and pipes, you can use this advanced technology. A lot of time is also saved in the process.

How Is Underground Cable Tracing Done?

Underground Cable Tracing is done using modern equipment. They consist of a utility locator or pipe and a cable locator. They simply pick up electromagnetic signals from the utility surface without getting the ground dug up.

The equipment even helps you to locate and trace your cables and pipes to their exact location. After tracing them, it marks the surface and the extent of the cables and pipes. So the engineers and technicians know exactly where and how much to dig.

The most basic form of cable locator device consists of the tone generator and the probe. The tone generator or the transmitter sends the signal under the ground to the cable and the probe or the receiver picks up that return signal at the other end of the cable. This is the most simplest of the devices that are used.

Applications Of Underground Cable Locators

There are many more different types of underground cable locators that are used by various industries. The simplest version of the device is used by plumbers, data communications installers & engineers and electricians.

Underground Cable Tracing in UAE is also used for construction sites, fibre optic cable installations, tracing power & gas lines and locating and identifying CATV cables that are buried under the ground. Such devices are found with a leading and renowned company, Cornerstone Middle East, in the UAE, who also operate in the GCC and wider MENA regions.

What Are The Electromagnetic Signals Picked Up?

There are mainly two types of signals &#; the active and the passive signals. In the case of active signals, it is applied by the transmitter and is most effective when there are multiple lines or pipes. It is used to differentiate between them by producing strong signals.

In the case of passive signals, the locator makes use of the electromagnetic signals that are produced in a natural way by the utility items. Lines that have power in them are easily located by using passive signals because of the signals that are naturally emitted from the lines. The transmitter easily catches the signals.

The Transmission Of The Signals

From the tone generator, two differently patterned signals are emitted. They are either square-wave or sine-wave signals. But of the two types of waves, the sine-wave tone generators are much better and more sophisticated. This is because they pick up the signals more accurately. In the process, they do not generate or pick up any extraneous signals. This sophistication is the reason for them being expensive.

Once your transmitter attaches itself to the cable that is to be traced, the probe at the other end starts detecting the audio or visual signals. When the probe is waved over a bundle of cables, you reach closer to the signal. The signal in the process starts getting stronger. The probe then amplifies the signals.

Choosing The Best Underground Cable Tracer

While shopping for the best underground cable locator or tracer you can contact the best suppliers in UAE because there are many renowned suppliers there now. But you have to look out for some features while you shop for your device. What are they? The features include:

&#; The range of the frequency should be usable at multiple levels of frequency.

&#; Estimation of the depth that it can make. If you have a high-end device it can go o huge depths while the lower-priced devices go to lesser depths.

&#; The durability factor serves its purpose right when you buy devices that are shock-proof and waterproof. They can last up to many years on end.

&#; Weight and size of the device also matters to a large extent. They should be light in weight so that they can easily be carried around and conveniently operated.

Additionally, you also have to look out for the clarity of the LCD. Other features include the capability of the GPS receiver, the overload protective features and the strike alert. The LCD screen should be big with strong backlighting to take in all the readings clearly. Graphical displays are also good with SSI readings. Signal strengths can easily be interpreted.

The GPS receiver helps to detect the cable and the way the operator is using it. The overload protective features help to protect the device from electricity cables and can also detect high voltage signals.

The strike alert is another protective feature that not protects the device but it also alerts the users of hazardous objects near where they are digging. It is a life saver.

Closing With The Advantages Of Underground Cable Locators

The cable locators have many advantages. They determine exactly the location and depth of the cables and pipes and make work easier and faster. They can also easily be carried around because of their portability. The devices are very simple devices that can easily be used and operated by technicians.

You can almost always use your locating device in all types of soil conditions which makes it a very flexible utility item. And the best part is that they are cheap and easy to maintain. Thus they are cost-effective devices that save a lot of money for the industries where they are used and applied in.

For all your requirements in this division you can get in touch with UAE&#;s leading supplier, Cornerstone Middle East. They are the best suppliers of premium quality underground cable locators.

If you are looking for more details, kindly visit Underground Sensors.