Edge of Dock Leveler vs Pit Leveler
Edge of Dock Leveler vs Pit Leveler
A dock leveler is a piece of equipment that is usually either mounted to the dock face or recessed into a pit at a loading dock door creating a bridge between a building and a transport vehicle.
For more information, please visit our website.
Table of Contents:
Part 1: The most common types of dock levelers include:
1. Pit Levelers
1.1 Mechanical Dock Levelers
1.2 Air Dock Levelers
1.3 Hydraulic Dock Levelers
1.4 Vertical Dock Levelers
2. Rail Dock Levelers
3. Edge of Dock Levelers
Part 2: The dock leveler's common terms and definitions.
Part 3: Difference between a truck leveler and a dock leveler
Part 1: Most Common Types of Dock Levelers:
Discover the most common types of dock levelers, and keep an eye out for unique designs exclusive to specific manufacturers.
1. Pit Levelers
Situated in a recessed concrete opening by the dock door of a building, this kind of dock leveler, also known as dock plate, falls into three main sub-categories of such pit levelers:
1.1 Mechanical Pit Leveler: Referred to as a mechanical dock leveler, this type is the most prevalent within the pit leveler category and usually comes with a lower cost. Operating with a mechanical spring system, this style is generally "upward biased," where the spring consistently urges the leveler deck to rise. No electrical power source at the dock is needed for this mechanical leveler. However, servicing and maintaining these levelers can be comparatively more expensive throughout their lifespan.
Mechanical Pit Leveler (also Known as Mechanical Dock Leveler)
1.2 Air Pit Leveler: Also identified as an air-dock leveler or dock plate, this variety employs a pneumatic bag system to elevate and lower the leveler deck. An electrical power source is necessary, either directly at the dock or nearby. Typically, a standard 110v power source is used. While these levelers are generally somewhat pricier than their mechanical counterparts, they may entail lower service and maintenance needs in comparison.
Air Pit Leveler (Also Known as Air-Dock Leveler)
1.3 Hydraulic Pit Leveler: Also known as a hydraulic dock leveler or dock plate, this type stands out as the most adaptable among pit-style levelers. Utilizing a hydraulic cylinder for deck movement and typically another for lip operation, these levelers can be configured in various ways and powered by anything from 110V single phase to 575V three-phase. The hydraulic choice offers greater flexibility compared to mechanical or air dock levelers and usually incurs lower service and maintenance expenses.
Hydraulic Pit Leveler (Also Known as Hydraulic Dock Leveler)
1.4 Vertical Dock Leveler: A vertical dock leveler is precisely as its name suggests - a dock leveler stored in a vertical position. The advantage of this design is evident: it enables the storage of the leveler inside the building, allowing the dock door to close directly on concrete instead of over the leveler, as with a pit leveler. This setup enhances environmental control within the building. Vertical levelers are commonly employed in food service applications or locations where washdown is a concern. They are typically hydraulically operated and either pit or shelf-mounted.
Vertical Dock Leveler
2. Rail Dock Levelers
Rail Dock Leveler: These levelers present a modification of the vertical leveler and are designed for servicing rail cars. Typically installed on a sliding rail, they can move horizontally along the rail track. Their movement along the track can be either manual or hydraulic, and the levelers themselves are generally operated hydraulically.
Rail Dock Leveler
3. Edge of Dock (EOD)
Edge of Dock (EOD) Leveler: This is a simple device that is usually mechanically operated but may be pneumatically or hydraulically operated. It is often found mounted on the exterior wall of a building with an integral loading dock bumpers set but may also be pit mounted. The EOD leveler has a limited vertical operating range and is geared toward applications where the transport vehicle bed is at, or very near, the floor level of the building (dock level). These units are generally inexpensive when compared to a pit or vertical dock leveler but may be considered an upgrade from portable dock boards as they are fixed to the dock face and have some form of lift assistance (mechanical, air, or hydraulic). A recommended normal working range of an EOD is typically +/- 3 inches.
Edge of dock Leveler
Suggested Article: Benefits of Installing a Hydraulic Edge-of-Dock Leveler
Part 2: Dock Leveler Common Terms and Definitions
- Activation System: It is responsible for the motion of the dock leveler and may or may not necessitate external power connections. Common activation systems include mechanical (springs), pneumatic (air bladders), and hydraulic.
- Attachments: This term refers to tools that can be affixed to a fork truck for load handling purposes. Accessories like clamps, slip sheet forks, and carpet poles can impact capacity and should be taken into account when choosing a dock leveler.
- Bumpers: These are used to shield the building, dock leveler, or vehicle restraint from contact and potential damage by the transport vehicle. Typically composed of rubber, the sizes and projections of loading dock bumpers vary, depending on factors like the vehicles served and driveway slope.
Loading Dock Bumpers
- Capacity: The manufacturer's capacity tag may not accurately represent the gross roll-over load for a particular dock leveler. Capacity is the load rating deemed suitable by the dock leveler manufacturer based on the user's application characteristics. This required capacity is determined by considering the GVW (Gross Vehicle Weight) and applying a complexity factor, which takes into account various factors such as the heaviest forklift and load, number of cycles, speed, life expectancy, loading slope, type of lift trucks, attachments, lip length, and more. To determine the necessary dock leveler capacity for a specific application, it's advisable to consult the authorized sales representative of the manufacturer.
- Deck: The deck assembly constitutes the primary component of the structure that vehicles drive over. Decks commonly feature an anti-skid surface like a tread plate for traction at different working angles. The assembly pivots at the rear end of the dock leveler, farthest from the transport vehicle, and has a hinged lip attached at the opposite end.
- Dock: This is the area of a building designated for loading and/or unloading transport vehicles.
- Dock Level: This term involves the vertical level aligned with the building's floor surface.
- Dock Pit: The pit is the recessed opening in the buildings floor designed to house the pit dock leveler. Typically, the pit's edges are bordered with structural steel angles embedded in the concrete.
Dock Pit
- Frame: The frame assembly is the supporting structure for a dock leveler.
Fast Heavy Industry supply professional and honest service.
- Gross Vehicle Weight (GVW): The GVW represents the total weight of both the material handling equipment (such as a lift truck or pallet jack) and the load. Essentially, it is the maximum weight being transferred across the dock leveler.
- Lip: The lip assembly is usually pivotally attached to the deck assembly moving from a vertically stored position to a position resting on the floor of the transport vehicle. Lips usually feature a tread plate material similar to the deck.
- Load: The load refers to the weight of a typical individual pallet on a transport vehicle. In standard capacity calculations, there is a maximum limit of twenty loads per transport vehicle.
- Shift: This term denotes the operational shift at the building. For capacity calculation purposes, a standard calculation would involve a maximum of eight trailers per shift.
- Shim: These are steel plates utilized to assist in leveling pit-mounted dock levelers. Shims can be positioned beneath the frame structure and welded in place to establish a structural load path to the building's foundation.
- Toe Guard: It is a protective shield affixed flush to the side of a deck assembly, offering toe protection when the dock leveler is positioned above dock level.
- Transport Vehicle: It refers to a cargo-carrying vehicle like a truck, semi-trailer, trailer, or railcar.
- Working Range: It is the suggested vertical travel range above and below dock level suitable for loading and unloading activities.
Part 3: Difference Between a Truck Leveler and a Dock Leveler
A truck leveler elevates the front of the truck to achieve a balanced stance, while the dock leveler (dock plate) serves as a bridge between the truck and the loading dock, filling the gap and enhancing the safety of material loading/unloading. When a dock is too high or low for a conventional dock leveler, a truck leveler is employed to align with the loading dock's height.
Truck Leveler. Photo Credit: Serco Loading Dock Solutions
Reach out to us for all your loading dock equipment needs, including top-notch dock levelers. With over 50 years of unparalleled expertise in Central Jersey, our dedicated team is here to ensure your loading dock operates seamlessly and efficiently.
Your satisfaction is our commitment, and we're ready to go above and beyond to exceed your expectations. Contact us today for unparalleled service and excellence that stands the test of time.
Call: 908-722- or
Suggested Read: Learn About Our Loading Dock Equipment Preventive Maintenance Programs
Tags: dock leveller, dock levelling, dock plate, edge of dock, dock leveler repair, dock plate repair, dock plate service, dock leveler service
Benefits of Installing an Air-Powered Dock Leveler
Air-powered dock levelers (also known as dock plates) are designed to provide excellent product worth through an extended, trouble-free, smooth operation. They provide several advantages over other types of dock levelers. For instance, the utilization of a user-friendly push button activation significantly enhances the efficiency and safety of the loading/unloading procedure. These levelers have demonstrated exceptional performance even in demanding environments with high usage and harsh conditions.
Air-powered levelers bridge the gap between hydraulic and mechanical dock levelers. With fewer moving components compared to mechanical counterparts, as these have lower maintenance needs. They encompass a multitude of advantageous operational and safety features, as they integrate distinctive and critical operational elements to ensure secure and dependable performance.
Main Benefits of Air-Powered Dock Levelers
These levelers offer several key benefits:
Superior performance
Reduced maintenance
Enhanced safety
User-friendly operation
Energy efficiency
Durability
The air-powered dock levelers airbag is made of materials that provide resistance against various chemicals, abrasions, and punctures. It is specially designed to withstand a wide range of temperatures, making it suitable for both extremely cold and hot environments, which is ideal for loading dock bays located in the New Jersey and New York City areas.
By offering these benefits, air-powered dock levelers provide an effective solution for efficient and safe loading/unloading operations, improving productivity and reducing maintenance requirements in your loading dock.
Important Factors About Air-Powered Levelers
That said, it is important to take into account the following factors:
Quality of the equipment: The reliability of a hydraulic, mechanical or air-powered dock leveler largely depends on the quality of the equipment itself. It is important to choose a reputable manufacturer, such as McGuire, known for producing high-quality and durable levelers.
Proper maintenance: Like any other equipment, these dock plates require preventive maintenance to ensure optimal performance. This may include lubricating moving parts, inspecting seals and air lines, and addressing any potential issues promptly.
Environmental factors: The performance of this specific loading dock equipment can be influenced by environmental factors like extreme temperatures, humidity, or dust. Therefore, it is crucial to select a dock leveler that is well-suited to the particular operating environment and implement necessary precautions to shield it from unfavorable conditions.
Operator training: Ensuring that the operators are properly trained in using the equipment can help prevent misuse or accidental damage, leading to trouble-free performance.
Installation: Proper installation is crucial to ensure trouble-free performance. It should be done by experienced professionals who follow the manufacturer's guidelines and specifications.
Although dock levelers with air-powered mechanisms can deliver dependable and trouble-free performance, it's important to recognize that no equipment is entirely exempt from potential issues. That's why it's crucial to prioritize regular maintenance, conduct periodic inspections, and address any problems promptly to ensure their trouble-free operation is optimized.
At Loading Dock Inc, our team of experienced professionals is fully devoted to providing you with comprehensive guidance and support at every stage of your project.
Our diverse selection of products encompasses a broad range of commercial garage doors, industrial doors, garage door operators, and accompanying accessories, so you can rest assured we have the perfect solutions for your project.
For over four decades, we have been a trusted provider, offering sales, installation, and servicing of commercial and industrial doors, as well as loading dock equipment. Our long-standing expertise and dedication guarantee that you will receive exceptional support and reliable solutions for all your door-related needs.
You can call us at 973-471- or us at
* 24-Hour Emergency Service Available for our Existing Customers! *
The company is the world’s best Loading Dock Leveler supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.