Scissor Lifts vs. Boom Lifts

Check now

Do you have a big job coming up and need to procure an aerial lift? Don&#;t know which kind is right for you? In our latest article, we will break it down for you! We are comparing scissor lifts vs. boom lifts. Let&#;s get started!

What Are Scissor Lifts?

Scissor lifts are used to elevate workers to high areas, and they are most commonly used in manufacturing and industrial settings. These particular lifts are supported by crisscrossing braces that extend upward.

Most scissor lifts are designed to move only up and down. However; some are able to move a few feet horizontally. One of the greatest advantages to scissor lifts is that they feature large platforms that can fit several people at once (along with materials).

Scissor Lifts Pros

• Larger Platform &#; Scissor lifts are awesome for those jobs that need multiple workers to work at an elevated level. The size of the platform tends to be much larger than with other types of aerial lifts.
• Cheaper &#; Scissor lifts are significantly less expensive than boom lifts.

Scissor Lifts Cons

• Lower Lift Heights &#; Most scissor lifts can only reach heights of 20-50 feet. This is significantly less than most boom lifts.
• Limited Maneuverability &#; Because most scissor lifts only move vertically, there is no way to maneuver them up and around obstacles.

What Are Boom Lifts?

A boom lift is a type of aerial lift, but it provides much greater flexibility than a scissor lift. This is because it is supported by a hydraulic arm that is capable of maneuvering around obstacles. Boom lifts can also extend to higher elevations.

There are two basic types of boom lifts. Articulating boom lifts have arms that bend, making it easier to move the bucket around things.Telescopic boom lifts, have straight arms. Telescopic lifts usually have higher weight capacities, but they are more difficult to maneuver.

Boom Lifts Pros

• Better Maneuverability &#; A boom lift is the better choice if you need to maneuver around objects. The long arms can be angled in many directions to access hard-to-reach places.
• Higher Lift Heights &#; Boom lifts usually extend much higher than scissor lifts. Lift heights can top 130 feet, as opposed to a maximum of about 50 feet with a scissor lift.

Boom Lifts Cons

• Smaller Platform &#; Boom lifts usually have smaller platforms, which means they hold fewer workers and materials.
• More Expensive &#; Boom lifts usually cost significantly more than scissor lifts.

Advantages of scissor hydraulic lifting platform:

1. Scissor hydraulic lift has a scissor bracket under the platform, so it runs very smoothly when it is loaded.

2. The supporting load has simple force and low stress, which prolongs its service life.

3. Now the installation is more convenient, as long as the ground is flat and the concrete in the pit is firm, you can fix it in the pit during installation.

4. Due to the large platform, it can be used without installing guide rails around, saving a lot of space.

5. Because it is a scissor bracket mechanism, it is safe to use and not prone to safety accidents.

You will get efficient and thoughtful service from Fast Heavy Industry.

Disadvantages of scissor hydraulic lifting platform:

1. Due to its relatively high height, a deeper foundation pit needs to be dug on site.

Advantages of straight top guide rail hydraulic lifting platform:

1. Since the height is relatively low, there is no need to dig deep foundation pits.

Disadvantages of straight top guide rail hydraulic lifting platform:

1. Since there is no support mechanism under the platform, accidents are prone to occur, once the wire rope breaks. The platform will fall down immediately, prone to safety incidents.

2. On-site installation is complicated, and guide rails must be installed around, which takes up a lot of floor space.

3. Because the platform is relatively large and the oil cylinder is not under the platform, the synchronization effect of the two hydraulic cylinders on both sides is required to be better. If the load is eccentric, it is easy to jam in operation, which will cause the lifting platform to tilt and jam.

4. Because it is a straight top guide rail type, the oil cylinder is relatively long and it is inconvenient to maintain.

5. As the platform is relatively large, if it is slightly inclined, it will cause greater friction between the pulley and the guide rail during operation, thereby reducing its service life.

6. The straight top rail type is a new type of product, and the technology is not as mature as the scissor type.

For more information, please visit Scissor Lift For Factories.